Mini Digger Breaker 25mm Full Kit
$2,095.80
Hydraulic breaker hammer attachment for mini excavators with 25mm pin mounting. Pre-gassed and ready to use straight out of the box. Full kit included with everything needed for installation and operation.
Compatible with Rhinoceros XN08, XN10, XN10-8, XN12-8 and most 0.8 to 1.5 ton mini excavators with matching 25mm pin specs
Hydraulic breaker attachment for mini excavators, fitted with 25mm pin mounting. Pre-gassed and ready to mount.
If you’re breaking concrete, busting through rock, ripping up compacted ground or frozen soil, this gets it done. Hits 500 to 1200 bpm with a flow rate of 10 to 30 l/min and operating pressure of 80 to 110 kg/cm2. Solid performance for demolition, trenching, and ground breaking on site.
Comes with the full kit so everything you need is on hand. Don't recharge the gas until the pressure actually drops.
Compatible with Rhinoceros XN08, XN10, XN10-8, XN12-8 and most 0.8 to 1.5 ton mini excavators. Always check your pin diameter (25mm), pin centers (85mm), and dipper gap (90mm) match before ordering.
Kit includes:
- Gas charging bottle
- Hoses
- 24mm/27mm spanner
- Allen key
- Punch to knock in the roll pin
- Pin to hold the chisel in the breaker
- 30mm ring spanner
- Chisel x 2
- Tool box
Technical specifications:
- Pin Diameter: 25mm
- Pin Centers: 85mm
- Dipper Gap: 90mm
- Body Weight: 80kg
- Operating Pressure: 80 to 110 kg/cm2
- Hydraulic Flow Rate: 10 to 301/min
- Impact Frequency: 500 to 1200 bpm
- Hose Diameter: 1/2 inch
- Chisel Diameter: 35mm
Related terms: mini excavator breaker, hydraulic hammer, breaker hammer attachment, concrete breaker, excavator demolition
