Mini Digger Auger
£499.00 – £654.00
Mini excavator post hole auger attachment, 25mm pin size that comes with the auger (the drill bit itself), a drive unit (motor), a mounting bracket, and 2x 96cm hydraulic hoses/pipes. It is perfect for installing fences, planting trees or setting up foundations.
Enhance the versatility of your mini digger with our post hole auger attachment. It comes with the auger (the drill bit itself), a drive unit (motor), a mounting bracket, and 2x 96cm hydraulic hoses/pipes. The drill bits are all 700mm long and have a 24mm square drive. If you would like just the drill bit or to order multiple different diameters, the drill bits can be bought separately here.
This is a robust, reliable tool that allows you to drill small, deep holes into very tough soils for:
- Fence posts, signposts, poles
- Tree or shrub planting (where a consistent hole size is needed)
- Small foundation work, light-duty deck or pergola footings, and much more
The auger can be used with Rhinoceros / JCB / Kubota and many other Micro Diggers of the 25mm attachment size. This auger is compatible with the Rhinoceros XN08, XN10-8, and XN12-9 but not the XN18 or XN20. However, many customers have adapted the mounting bracket so the auger can be fitted to larger diggers. Please contact us if you have any questions.
The Auger is powered by quick connections to the mini digger's hydraulic system, making setting up quick and easy. See the 'Technical Specifications' for more information.
Related terms: auger drill, earth drill, earth auger
Additional information
| Drill Bit Length | No Drill Bit, 110mm, 200mm, 250mm, 300mm |
|---|
Technical Specifications
- Turning Torque: 305Nm
- Flow Rate: 10 -30 LPM
- Pressure: 18Mpa
Dimensions
- 200mm Diameter x 700mm Length
- x2 25mm Pin mountings
- 9cm wide bracket on mounting
- Mounting bracket dipper gap 90mm between pin centres 86mm
